Installation Guide
Table Of Contents
- About This Guide
- Access Points
- Installing AP300
- Safety Precautions
- Best Practices for an AP300/AP1000 Network
- Unpack the AP300
- Determine Power Requirements
- Installation Requirements
- Install the AP300
- Select a Location
- Attach the Provided Antennas
- Install the Remote Antenna Mount (optional)
- Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)
- Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)
- Install Antennas With One Connector (optional)
- Install the Access Point
- Check AP300 LED Activity
- Where to Go From Here
- Installing AP320i
- Installing AP332e
- Installing AP332i
- Cautions and Warnings
- Regulatory Information
- Supported PoEs
- Optional External Antennas
© 2012 Meru Networks, Inc. Optional External Antennas 101
Figure 55: Installation on a Pole
ACC-ANT-O6ABGN-0607-PT
This antenna model can be easily mounted onto a flat surface using the provided
drywall screws, as shown in Figure 56. Simply drill the four holes required for the
screws at the corners and then screw the antenna to the surface.
Figure 56: Installation on a Flush Wall