Installation Guide
Table Of Contents
- About This Guide
- Access Points
- Installing AP300
- Safety Precautions
- Best Practices for an AP300/AP1000 Network
- Unpack the AP300
- Determine Power Requirements
- Installation Requirements
- Install the AP300
- Select a Location
- Attach the Provided Antennas
- Install the Remote Antenna Mount (optional)
- Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)
- Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)
- Install Antennas With One Connector (optional)
- Install the Access Point
- Check AP300 LED Activity
- Where to Go From Here
- Installing AP320i
- Installing AP332e
- Installing AP332i
- Cautions and Warnings
- Regulatory Information
- Supported PoEs
- Optional External Antennas
102 Meru Access Point Installation Guide © 2012 Meru Networks, Inc.
Alternatively, the user can install the antenna on a raised pole using the provided
flexible wall/mast mount, as depicted in Figure 57.
Figure 57: Installation on a Pole
ACC-ANT-O1BG-1300-PN
This antenna comes with a convenient L-bracket that can be used in conjunction with
the pole-mounting setup, as shown in Figure 58 and Figure 59.