Installation Guide
Table Of Contents
- About This Guide
- Access Points
- Installing AP300
- Safety Precautions
- Best Practices for an AP300/AP1000 Network
- Unpack the AP300
- Determine Power Requirements
- Installation Requirements
- Install the AP300
- Select a Location
- Attach the Provided Antennas
- Install the Remote Antenna Mount (optional)
- Install External ACC-ANT-MIMO-MNT Antenna with Three Connectors (optional)
- Install Remote ACC-ANT-6ABGN-24 Antenna with Six Connectors (optional)
- Install Antennas With One Connector (optional)
- Install the Access Point
- Check AP300 LED Activity
- Where to Go From Here
- Installing AP320i
- Installing AP332e
- Installing AP332i
- Cautions and Warnings
- Regulatory Information
- Supported PoEs
- Optional External Antennas
50 Meru Access Point Installation Guide © 2012 Meru Networks, Inc.
Installing AP320i
Set AP320i on a Shelf
You can remove the mounting bracket(s) before setting AP320i on a shelf by simply unscrewing the
screws that attach it to the underside of the AP. The AP ships with rubber feet on the underside to
ensure that it doesn’t slide or move at all when deployed on a flat surface.
Figure 32 demonstrates how to remove the AP from a ceiling-mounted installation in the case that it
needs to be moved to a shelf or flat surface.
Figure 32: Remove the AP320i Ceiling Mount Bracket
Push clip toward AP300i
to release the unit from
the ceiling bracket.
Mounting
bracket
AP300i
00238