Installation Guide

Table Of Contents

Install the AP332e

Figure 37: Attaching the AP to the Wall Mount

7. Slide the AP horizontally to lock the tabs into place.

8. If not already connected, you may now connect the Ethernet cable and DC power (if used) and

verify that the AP comes online.

Mount AP332e Below a Suspended Ceiling

The provided ceiling mounting brackets allow the AP332e to attach to suspended ceiling T-rails. The

AP ships with two different ceiling mounting bracket options to accomodate varying sizes of ceiling T-

rails. Be sure to attach the correctly-sized bracket to your AP prior to attempting to deploy it. Note

that each plastic bracket contains descriptive text to indicate the ceiling T-rail size for which it is

designed.

To mount an AP332e below a suspended ceiling:

1. Determine the location on the ceiling rail where the AP will be mounted and remove the ceiling

tiles.

2. Attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 37)

to the AP’s Receiving Slots and sliding the bracket until it locks in place.

3. Press the AP and bracket against the rail and twist to lock it into place.

Note:

Figure 37 shows an AP332i model being attached to the bracket, but the

process is identical for either AP.