User's Manual

USA - Federal Communications Commission (FCC)

This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the

following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference that may cause undesired operation.

NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits.

Nevertheless, the adapter should be used in such a manner that the potential for human contact

during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency

exposure limits, you should keep a distance of at least 20 cm between you (or any other person in the

vicinity), or the minimum separation distance as specified by the FCC grant conditions, and the

antenna that is built into the computer. Details of the authorized configurations can be found at

http://www.fcc.gov/oet/ea/ by entering the FCC ID number on the device.

Interference Statement

This wireless adapter has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate

radio frequency energy. If the wireless adapter is not installed and used in accordance with the

instructions, the wireless adapter may cause harmful interference to radio communications. There is no

guarantee, however, that such interference will not occur in a particular installation. If this wireless

adapter does cause harmful interference to radio or television reception (which can be determined by

turning the equipment off and on), the user is encouraged to try to correct the interference by taking one

or more of the following measures:

Reorient or relocate the receiving antenna of the equipment experiencing the interference.

Increase the distance between the wireless adapter and the equipment experiencing the interference.

Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the

equipment experiencing the interference is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructions

as described in the user documentation that comes with the product. Any other installation or use

will violate FCC Part 15 regulations.