User's Manual

Canada – Industry Canada (IC)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of

the device.

Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its

operation in the 5.15 to 5.25 GHz frequency range. Industry Canada requires this product to be used

indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference

to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25 to

5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage to

this device.

To comply with RF exposure requirements all antennas should be located at a minimum distance of 20

cm, or the minimum separation distance allowed by the module approval, from the body of all persons.

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop

configurations or co-location with another transmitter), then the FCC authorization is no longer

considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM

integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a

separate FCC authorization.

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that

20 cm may be maintained between the antenna and users. The final end product must be labeled in a

visible area with the following: “Contains FCC ID: RE7-AP433”, “Contains IC: 6749A-AP433”

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or

remove this RF module in the user’s manual of the end product which integrates this module.

The end user manual shall include all required regulatory information/warning as show in this manual.

All parts of this specification, the ownership and final explanation rights belong to Meru Networks, Inc.

The direct or indirect data loss or interest loss caused by the manipulation that hasn’t follow the requests

of the specification, and the directly, indirectly, intentionally and unintentionally destroying and hidden

trouble caused by the uses’ improper installation and wrong usage, our company and staff do not

undertake any responsibility. We reserve the right to modify the operation instruction without notice

otherwise.