User's Manual
Table Of Contents
- Meru Networks AP822 Installation Guide
- 1 About AP822
- 2 Installing AP822eV2
- 3 Installing AP822iV2
- 4 AP822 Mounting
- Horizontally on a Shelf
- Vertically on a Wall
- Installation
- Removal
- Box Mount
- Below a Standard Suspended Ceiling
- AP Installation over Standard 9/16” or 15/16” T-Bar
- AP Removal from Standard 9/16” or 15/16” T-Bar
- AP Installation over Interlude & Silhouette T-Bars
- AP Removal from Interlude & Silhouette T-Bar
- Above a Standard Suspended Ceiling
- LED Lights
- Next Steps
- 5 Approved Antennas
- Wall Mount AP832e Antenna Orientation
- A Regulatory Information
- Regulatory Specifications
- Declaration of Conformity, Federal Communication Commission
- Declaration of Conformity, Industry Canada
- Declaration of Conformity, R&TTE Directive 1999/5/EC
- VCCI Statement
- General Information of RF Exposure
- B Additional Notes
- Maximum EIRP
- Dual Concurrent Same Band Operation
- Manufacturing Information
- Distributed Antenna Systems (DAS)
- Air Handling Space Requirements
- Frequencies Blocked for Regulatory Compliance
- Restriction of Hazardous Substances
- C Cautions and Warnings
- Cautions
- Warnings
Before You Begin 19
3 Installing AP822iV2
This chapter provides all the information that users need to install Meru AP822iV2. After user
completing installation procedure, see the Meru System Director 6.1 Configuration guide for
detailed instructions on the various configuration options.
Follow all safety precautions mentioned in the “Safety Precautions” on page 13 section.
Before You Begin
This section provides information that users should know before installing AP822iV2.
Package Contents
The AP822iV2 shipping package should contain the following. Please contact Meru, if pack-
ages do not contain any of the following items.
Kensington Lock
The AP822iV2 has an access slot at the back to support Kensington Lock. Users can lock the
AP822iV2 with a standard security cable, such as those used to secure laptop computers. See
“AP822 Kensington lock” on page 20 for location of AP822 Kensington Lock.
TABLE 3: Package Contents
Item Model Number Quantity
AP822 AP822iV2 1
15/16” T-Bar & Wall-mount combo adapter
(650-00232)
1
9/16” T-bar Adapter (650-00233) 1
Wall-mount bracket (650-00234) 1
Wall-mount hardware kit (4 spacers,
M3x10 & M3x30 screws) (840-00126)
1