User's Manual
Table Of Contents
- Meru Networks AP822v2 Installation Guide
- 1 About AP822
- 2 Installing AP822eV2
- 3 Installing AP822iV2 and XP8i
- 4 Mounting AP822 and XP8i
- 5 Approved Antennas
- Wall Mount AP822e Antenna Orientation
- A Regulatory Information
- Regulatory Specifications
- Declaration of Conformity, Federal Communication Commission
- Declaration of Conformity, Industry Canada
- Declaration of Conformity, R&TTE Directive 1999/5/EC
- VCCI Statement
- General Information of RF Exposure
- B Additional Notes
- Maximum EIRP
- Dual Concurrent Same Band Operation
- Manufacturing Information
- Distributed Antenna Systems (DAS)
- Air Handling Space Requirements
- Frequencies Blocked for Regulatory Compliance
- Restriction of Hazardous Substances
- C Cautions and Warnings
- Cautions
- Warnings
Before You Begin 15
2 Installing AP822eV2
This chapter provides all the information that users need to install Meru AP822eV2. After user
completing installation procedure, see the Meru System Director 6.1 Configuration guide for
detailed instructions on the various configuration options.
Follow all safety precautions mentioned in the “Safety Precautions” on page 14 section.
Before You Begin
This section provides information that users should know before installing AP822eV2.
Package Contents
The AP822eV2 shipping package should contain the following. Please contact Meru, if pack-
ages do not contain any of the following items.
TABLE 1: Package Contents
Item Model Number Quantity
AP822 AP822eV2 1
Omni Directional Rubber Duck antenna ANT-01ABGN-0303-0
Gain: 3/4 dBi
4
15/16” T-Bar & Wall-mount combo adapter
(650-00232)
1
9/16” T-bar Adapter (650-00233) 1
Wall-mount bracket (650-00234) 1
Wall-mount hardware kit (4 spacers,
M3x10 & M3x30 screws) (840-00126)
1