User's Manual

41
5 Approved Antennas
Only approved antennas may be used in conjunction with AP822eV2 access points. Access
Points have been designed to operate with the antennas listed below. Antennas not included
in this list are strictly prohibited for use with these devices. The required antenna impedance
is 50 ohms.
S.No Meru Part Number Description Gain (2.4GHz/
5.0GHz)
1 ANT-01ABGN-0304-0 Omni Directional Rubber Duck
antenna
3/4 dBi
2 ANT-01ABGN-0406-O High Gain Omni Directional Rubber
Duck antenna
4/6 dBi
3 ANT-ABGN23O-W Omni Directional Rubber Duck
antenna
2/3 dBi
4 ANT-I2ABGN-0304-O Ceiling mount Omni Directional
Antennna
3/4 dBi
5 ANT-O4ABGN-0607-PT Dual Band Wall Mount Patch 4-lead
Antenna
6/7 dBi
6 ANT-O4ABGN-0606-O Outdoor Omni Directional 4-leads
Dual Band Antenna
6/6 dBi
7 ANT-ABGN-23 Dual Band Ceiling mount Omni Direc-
tional 3-lead Antenna
3/4 dBi
8 ANT-6ABGN-24 Dual Band Ceiling mount Omni Direc-
tional 6-lead Antenna
2.5/4 dBi
9 ANT-ABGN47O Dual Band High Gain Dipole Omni
Directional Antenna
4.7/4.7 dBi
10 ANT-O6ABGN-0606-O Dual Band Omni Directional 6-lead
Antenna
6/6 dBi
11 ANT-I3ABGN-0304-O Dual Band Ceiling mount Omni Direc-
tional 3-lead Antenna
3/4 dBi
12 ANT-O6ABGN-0607-PT Dual Band Wall Mount Patch 6-lead
Antenna
6/7 dBi