User's Manual
Table Of Contents
- Meru Networks AP822v2 Installation Guide
- 1 About AP822
- 2 Installing AP822eV2
- 3 Installing AP822iV2 and XP8i
- 4 Mounting AP822 and XP8i
- 5 Approved Antennas
- Wall Mount AP822e Antenna Orientation
- A Regulatory Information
- Regulatory Specifications
- Declaration of Conformity, Federal Communication Commission
- Declaration of Conformity, Industry Canada
- Declaration of Conformity, R&TTE Directive 1999/5/EC
- VCCI Statement
- General Information of RF Exposure
- B Additional Notes
- Maximum EIRP
- Dual Concurrent Same Band Operation
- Manufacturing Information
- Distributed Antenna Systems (DAS)
- Air Handling Space Requirements
- Frequencies Blocked for Regulatory Compliance
- Restriction of Hazardous Substances
- C Cautions and Warnings
- Cautions
- Warnings
Declaration of Conformity, Industry Canada48
Manufacturer Information
Meru Networks, Inc
894 Ross drive,
Sunnyvale, CA 94089
USA
Declaration of Conformity
The Class B digital portion of this apparatus complies with Canadian standard ICES-003.
These devices comply with RSS210 of Industry Canada.
La partie numérique de Classe B de cet appareil est conforme à la norme ICES-003 canadien.
Ces appareils sont conformes à la norme RSS 210 d'Industrie Canada..
Per RSS 210 A9.5 point 7:
• The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for
harmful interference to co-channel mobile satellite systems (The device for the band 5150-
5250 MHz is only for indoor usage to reduce potential for harmful interference to co-chan-
nel mobile satellite systems)
• The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-
5725 MHz) to comply with the EIRPlimit; and the maximum antenna gain permitted (for
devices in the band 5725-5825 MHz) to comply with the EIRP limits specified for point-to-
point and non point-to-point operation as appropriate, as stated in section A9.2(3) (The
maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725
MHz) to comply with the EIRPlimit; and the maximum antenna gain permitted (for devices
in the band 5725-5825 MHz) to comply with the EIRP limits specified for point-to-point and
non point-to-point operation as appropriate, as stated in section A9.2(3).
• In addition, users should also be cautioned to take note that high-power radars are allo-
cated as primary users (meaning they have priority) of the bands 5250-5350 MHz and
5650-5850 MHz and these radars could cause interference and/or damage to WLAN
devices (En outre, les utilisateurs doivent également être avertis de prendre note que les
radars à haute puissance sont désignés comme utilisateurs principaux (ils ont la priorité)
des bandes 5250-5350 MHz et 5650-5850 MHz et ces radars pourraient cause des inter-
férences et / ou endommager aux appareils WLAN.
• These devices are not permitted to operate in the 5600 - 5650 MHz band (Ces appareils ne
sont pas autorisés à opérer dans le 5600 - bande 5650 MHz.)
For products available in the Canadian markets, only channels 1 through 11 can be operated.
Selection of other channels is not authorized. Operation is subject to the following two condi-
tions: (1) this device may not cause interference, and (2) this device must accept any interfer-
ence, including interference that may cause undesired operation of this device.
Pour les produits disponibles sur les marchés canadiens, seuls les canaux 1 à 11 peuvent être
utilisés. La sélection d'autres canaux n'est pas autorisée. Son fonctionnement est soumis aux