Technical data

Band Steering Feature
© 2012 Meru Networks, Inc. Configuring an ESS 79
Band Steering Timeout(seconds) : 5
This example sets band steering to the A channel on the existing ESS named Bandsteeress:
default# configure terminal
default(config)# essid Bandsteeress
default(config-essid)# dataplane
default(config-essid)# dataplane bridged
default(config-essid)# band-steering-mode a-steering
default(config-essid)# end
default# sh essid Bandsteeress
ESS Profile Name : Bandsteeress
SSID : Bandsteeress
Security Profile Name : default
Primary Radius Accounting Server :
Secondary Radius Accounting Server :
Accounting Interim Interval (seconds) : 3600
Beacon Interval (msec) : 100
SSID Broadcast : on
Bridging : none
New AP's Join ESS : on
Tunnel Interface Type : none
VLAN Name :
GRE Tunnel Profile Name :
Allow Multicast Flag : off
Silent Client Polling : off
Enable Virtual Cell : on
WMM Support : off
DTIM Period (number of beacons) : 1
Virtual Cell Type : shared-bssid
Dataplane Mode : bridged
B Supported Transmit Rates (Mbps) : 1,2,5.5,11
B Base Transmit Rates (Mbps) : 1,2,5.5,11
A Supported Transmit Rates (Mbps) : 6,9,12,18,24,36,48,54
A Base Transmit Rates (Mbps) : 6,12,24
G Supported Transmit Rates (Mbps) : 6,9,12,18,24,36,48,54
G Base Transmit Rates (Mbps) : 6,9,12,18,24,36,48,54
BG Supported Transmit Rates (Mbps) :
1,2,5.5,11,6,9,12,18,24,36,48,54
BG Base Transmit Rates (Mbps) : 1,2,5.5,11
Enable Countermeasure : on
Packet Error Control : off
Packet Error Limit : 0
Rx Packet control : off
Rx Packet Limit : 0
Band Steering Mode : a-steering
Band Steering Timeout(seconds) : 5
This example disables band steering:
default# configure terminal
default(config)# essid Bandsteeress
default(config-essid)# band-steering-mode disable
default(config-essid)# end
default# sh essid Bandsteeress