Technical data

132 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Configure a Security Profile With the CLI
Configure 802.11 WEP Encryption
The controller supports two WEP cypher suites: WEP128 and WEP64.
The key configuration parameters allow the setting of the mutually shared key and
the choice of key slot positions from 1 to 4, as allowed by most user key configuration
programs.
psk key key
Sets the key for a WPA2/PSK/WPA-PSK configuration. Assign one
PSK per ESSID that uses this Security Profile. The key can be:
  hexadecimal characters (that is, 0-9,a-f, A-F). Example:
0xa0a1a2a3a4a5a6a7a8a9aaabac or
0x12345678901234567890abcdef...
 8 to 63 ASCII characters (the characters ! \ " ? must be
escaped with the backslash (\) character; for example \!
\?). Example: m6o0secret79ckey
radius-server primary
profile
Specifies the Radius profile information that is used for the
primary Radius server.
radius-server secondary
profile
Specifies the Radius profile information that is used for the
secondary Radius server.
8021x-network-initiation
Determines 802.1X initiation method. When enabled (default), the
AP sends the first EAP packet (an EAP ID request) to the wireless
station to start 802.1X after the wireless station completes 802.11
authentication and association to an 802.1X-enabled ESSID. With
the command no 8021x-network-initiation, the wireless station
sends an EAPOL Start packet to the AP to start the 802.1X
exchange.
pmkcaching pmkcaching |
disable
Enables or disables PMK caching.(WPA2/Mixed profiles only)
rekey period n
Sets the PTK rekey period. The default is set to 60 seconds and the
allowable range is 60 seconds to 60 minutes. (WPA only)
[no] group-rekey interval
n
Sets the GTK group rekey period. The default is set to 60 seconds
and the allowable range is 0 - 65535 (WPA only)
Table 7: Commands to Configure WPA/WPA2
Command Purpose