Technical data

134 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Configure a Security Profile With the CLI
Profile Name L2 Mode Data Encrypt Firewall
Filter
default clear none
captive-portal clear none
wep wep wep64
802.1x 802.1x wep128
wpa wpa tkip
wpapsk wpa-psk tkip
wpa2 wpa2 ccmp
wpa2psk wpa2-psk ccmp
Security Profile Table(8)
To view the details of an individual Security Profile, use the show security-profile
profile-name command.
default# show security-profile wpa-leap
Security Profile Table
Security Profile Name : wpa-leap
L2 Modes Allowed : 802.1x
Data Encrypt : none
Primary Radius Profile Name : ACS-87-8#
Secondary Radius Profile Name :
WEP Key ASCII:(default) 13 chars / 0x:26 chars : *****
Static WEP Key Index : 1
Re-Key Period (seconds) : 0
Enable Multicast Re-Key : off
Captive Portal : disabled
802.1X Network Initiation : on
802.1x Termination : PEAP, TTLS
Shared Key Authentication : off
Pre-shared Key (Alphanumeric/Hexadecimal) : *****
Group Keying Interval (seconds) : 0
PMK Caching : disabled
Key Rotation : disabled
Reauthentication : off
MAC Filtering : off
Firewall Capability : none
Firewall Filter ID :
Security Logging : off
Use the commands show web login-page and show web custom-area to find out
what set of web pages are used for Captive Portal and WebAuth.