Technical data

Radius Authentication
© 2012 Meru Networks, Inc. Authentication 151
You can also skip step 6 above and select the Primary Radius Profile Name and
Secondary Radius Profile Name directly from the ESS as part of step 7.
Configure Radius Authentication for Administrators With the Web UI
Configure Radius authentication for all administrators by following these steps:
1. Click Configuration > User Management > Setup.
2. Select Radius for Authentication Type at the top of the screen. See Figure 21.
3. There are three tabs for admin authentication (see m), Radius, Tacacs+ and Local
Admins. The Radius tab is the default.
Figure 20: Configure a User for Radius Authentication
4. Provide the IP address of the primary Radius server.
5. Provide a primary Radius port number; the default is 1812.
6. Provide the secret key for Radius server access.
7. Optionally repeat steps 4, 5 and 6 for a secondary Radius server.
8. Click OK.