Technical data

156 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Radius Authentication
* Input-octets, output-octets, input-packets and output-packets are in Radius stop messages in 3.6,
but those attributes are not included in Radius Interim Update messages.
Acct-Input-Packets*
Number of packets received on this port (interface) and sent
in Accounting-Request when Accounting status type is STOP
Acct-Output-Packets*
Number of packets sent on this port (interface) and sent in
Accounting-Request when Accounting status type is STOP
Acct-Output-Octets*
Number of octets sent on this port (interface) and sent in
Accounting-Request when Accounting status type is STOP
Acct-Terminate-Cause
Used to get the reason for session termination and sent in
Accounting-Request when Accounting status type is STOP
Acct-Delay-Time
Sent to indicate the number of seconds we have been waiting
to send this record.
AP ID
Vendor specific info: the AP ID to which client connected.
Sent when accounting starts
AP ID
Vendor specific info: the AP ID from which client disconnected
from. Sent when accounting stops
AP Name
Vendor specific info: The AP Name to which client connected.
Sent when accounting starts
AP Name
Vendor specific info: the AP ID from which client disconnected
from. Sent when accounting stops
Session-Time Number of seconds between start and stop of session
Table 10: Radius Authentication Attributes
Radius Attribute Description
User-Name Username
NAS-IP-Address Controller IP Address
Table 9: Radius Accounting Attributes
Radius Attribute Description