Technical data

Modifying Detection and Mitigation CLI Settings
© 2012 Meru Networks, Inc. Rogue AP Detection and Mitigation 197
Figure 30: Web UI List of Allowed APs
2. To add a BSSID to the list, click Add.
a. In the BSSID boxes, type the BSSID, in hexadecimal format, of the permitted access
point.
b. To add the BSSID to the ACL, click OK.
3. To delete a BSSID from the list, select the BSSID, click Delete, then OK.
Alter the List of Blocked APs with the Web UI
To change the list of allowed APs, follow these steps:
1. From the Web UI click Configuration > Wireless IDS/IPS > Rogue APs > Blocked
APs. The table shows information about access points listed as blocked BSSIDs in
the access control list (ACL).
2. To see an updated list of the APs blocked in the WLAN, click Refresh.
3. To add an AP to the blocked list, click Add.
a. In the BSSID box, type the BSSID, in hexadecimal format, of the access point.
b. Add the BSSID to the ACL, by clicking OK.
4. The blocked BSSID now appears on the list with the following information:
— BSSID The access point's BSSID.
— Creation Time The timestamp of when the blocked AP entry was created.