Technical data

224 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Viewing AP Status
Audit Polling Period (seconds)/0 disable Polling : 60
Software Version : 3.7-49
Network Device Id : 00:90:0b:07:9f:6a
System Id : 245AA7436A21
Default AP Init Script :
DHCP Relay Passthrough : on
Controller Model : MC3000
Country Setting : United States Of
America
Manufacturing Serial # : N/A
Management by wireless stations : on
Controller Index : 0
Topology Information Update : off
AP150 Vcell : enable
Viewing AP Status
From the Web UI, view AP radio status by clicking Monitor > Dashboard > Radio or
Monitor > Diagnostics > Radio. Click Help for descriptions of the charts. The icons
at the bottom of all screens include a green AP (enabled) and a red AP (disabled);
you can also see the same information at Monitor > Dashboard > System.
There are several CLI commands you can use to view AP status:
Table 17: Commands to View System Status
Command Purpose
show ap [index]
Displays the status of the AP, such as serial number,
uptime, operational status, availability, alarm state,
security mode, privacy bit, boot script, AP model, and
FPGA version. If the AP index is not specified, a
summary of the AP status is displayed.
show antenna-property
Displays the antenna properties.
show ap-connectivity
Displays the access point connections.
show ap-discovered
Displays the list of discovered access points and
stations.
show ap-limit
Displays how many APs are licensed for this controller.