Technical data

250 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Configuring Codec Rules
The Codec type can be one of the following
Command Purpose
configure terminal
Enter global configuration mode.
qoscodec rule-id codec type
qosprotocol {H323v1|sip|none}
tokenbucketrate tbr
maxdatagramsize maxdg
minpolicedunit minpol samplerate
sr
Enter QoS Codec configuration for the specified rule ID.
Use show qoscodec to obtain a list of rule IDs. The
following are the required parameters:
 codec. Enter the Codec type after at the Codec keyword.
The acceptable Codec types are given below.
 qosprotocol. The QoS protocol. This can be one of the
following:
H323v1 (H.323v1); sip (SIP - Session Initiation Protocol);
none. This is used to denote all other protocols.
 tokenbucketrate. Token bucket rate, from 0 to 1000
Kbps or 1-64 Mbps, depending on the box checked.
 maxdatagramsize. Maximum datagram size. From 0 to
1,500 bytes.
 minpolicedunit. Minimum policed unit. From 0 to 1,500
bytes.
 samplerate. Sample rate. From 0 to 200 packets per
second.
... commands ...
Enter the QoS CODEC configuration commands here.
end
Return to privileged EXEC mode.
copy running-config startup-config
This is an optional step to save your entries in the
configuration file.
Type Description
1016
1016 Audio: Payload Type 1, Bit Rate 16 Kbps
default
Contains the default TSpec/ RSpec for unknown codecs or codecs for which there is no
entry in the codec translation table
dv14
DV14 Audio: Payload Type 5, Bit Rate 32 Kbps