Technical data

252 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
QoS Statistics Display Commands
QoS Statistics Display Commands
Displaying Phone/Call Status
To display the active SIP phones that have registered with a SIP server, use the show
phones command.
Controller(15)# show phones
MAC IP AP ID AP Name Type Username Server
Transport
00:01:3e:12:24:b5 172.18.122.21 3 QoS-Lab sip 100 172.18.122.122 udp
Phone Table(1 entry)
Controller(15)#
To display the active SIP phone calls, use the show phone-calls command.
controller# sh phone-calls
From MAC From IP From AP From AP Name From Username From Flow
Pending To MAC To IP To AP To AP Name To Username
To Flow Pending Type State
Table 19: QoS CODEC Configuration Mode Commands
Command Purpose
tokenbucketsize size
Token bucket size in bytes. From 0 to 16,000 bytes. Defaults to 8.
peakrate rate
Traffic spec peak rate. From 0 to 1,000,000 bytes/second.
Defaults to 0.
rspecrate rate
Reservation spec rate. From 0 to 1,000,000 bytes/second.
Defaults to 0.
rspecslack slack
Reservation spec slack. From 0 to 1,000,000 microseconds.
Defaults to 0.