Technical data

SNMP Configuration
© 2012 Meru Networks, Inc. Configuring SNMP 281
Objects That Monitor System Status Through SNMP/OID
Use the SNMP get operation to monitor these objects:
Agent Contact and Location Commands
The following are the commands to set the system description, contact and location
of the SNMP agent:
No Case OID Shows
1 System Uptime
mwWncVarsUpTime in
mwConfigController.my
system uptime
2 System Operational
Status
mwWncVarsOperationalS
tate in mwConfigCon-
troller.my
system’s current operational status
3 System
Availability Status
mwWncVarsAvailabilitySta-
tus in mwConfigController.my
system’s current available status.
4 AP Uptime mwApUpTime in mwCon-
figAp.my
AP’s uptime
5 AP Operational
Status
mwApOperationalState in
mwConfigAp.my
AP’s current operational status
6 AP Availability
Status
mwApAvailabilityStatus in
mwConfigAp.my
AP’s current available status
Table 23: Configure SNMP Description, Contact and Location
Command Purpose
configure terminal Enter global configuration mode.
snmp-server contact text
Sets the system contact string. For example:
snmp-server contact [e-mail]
snmp-server location text
Sets the system location string. For example:
snmp-server location Tower Building, IT Department