Technical data

System Logs
© 2012 Meru Networks, Inc. Troubleshooting 295
Controller rebooted by admin Controller has been manually rebooted.
AP Boot Image Version Mismatch
The boot image version on the AP does not match
that required for the version of the AP software.
Action: The boot image must be upgraded using
the upgrade ap command with the boot image
option before attempting to upgrade the AP
software version.
AP Initialization Failure
The AP failed to initialize properly.
Action: Check that the AP network cables are
properly connected. Check that the version of the
AP boot image matches the version of the AP
software, and that the AP software version
matches the software version of the controller. If
the AP still fails to initialize after these checks,
contact Meru Customer Support.
AP Temperature
The AP temperature has exceeded the maximum
threshold.
Hardware Diagnostic
The AP failed the hardware diagnostic checks.
Action: Contact Meru Customer Support.
ROGUE AP DETECTED CLEAR STATION
mac=<mac-address> bss=<bssid>
ch=<channel-id> reported by AP <ap-id>
A station previously reported as rogue is not
detected any longer by any of the access points.
ROGUE AP DETECTED CRITICAL STATION
mac=<mac-address> bss=<bssid>
ch=<channel-id> reported by AP <ap-id>
A station using an unknown BSSID as been
detected.
Action: Check if the bssid belongs to another valid
WLAN. If not, you may decide to turn on the rogue
AP mitigation feature.
Radio Card Failure
The AP radio card has failed.
Contact Meru Customer Support.
WLAN services started on controller
System Director processes have been started on
the controller.
Syslog Message Description