Technical data

36 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
System Licensing
Configure a License with the Web UI
To see your license from the CLI, use the following commands:
controller# show controller
controller# show license
controller# show license-file active
You need a license for any of the following optional features if you plan to enable
them with release 5.1:
— More than five A/B/G APs
— N-capable AP300s
— N+1 (for more than two controllers)
— Per-User Firewall
— GRE Tunnel
— Dual ABG
— Mesh/Wireless
Configure a License with the Web UI
To see your license from the GUI, click Maintenance > Licensing > View License. To
import a license using the GUI, click Maintenance > Licensing > Import License and
follow the directions. To see existing licenses, click Maintenance > Licensing > View
License.
The following CLI command imports the license file license17331.lic from the FTP
server at 192.168.1.10 to an active MC3000 controller:
controller# configure terminal
controller(config)# license
ftp://admin:admin@192.168.1.10/license17331.lic active
controller(config)# end
Use the show license command to see the status of the system licenses:
Feature Name CtlrStatus LicenseType Expiry Date TotalCount
InUse
controller active permanent - 1 1
ap active permanent - 30 2
DUAL_A_B_G active permanent - 30 1
N_PLUS_1 active permanent - 5 0
PER_USER_FW active permanent - 1 1
GRE_TUNNELS active permanent - 1 1
11n_upgrade active trial 05/02/2010 1 1
License Table(7)