Technical data

58 Meru System Director Configuration Guide © 2012 Meru Networks, Inc.
Adding an ESS with the CLI
controller# configure terminal
controller(config)# essid corp-users
controller(config-essid)#
Enable and Disable
The Enable and Disable field represents all the Enabled and Disabled services of a
profile. If a specific ESS profile is Disabled, the NMS deletes all the Services that
belong to the ESS profile. If a specific ESS profile is Enabled, the NMS creates all the
Services that belong to the ESS profile. A client will not associate to the ESSID profile
when its state is disabled.
CLI Configuration
MERUCNTRL# sh essid
ESS Profile(3)
MERUCNTRL# configure terminal
MERUCNTRL(config)# essid meru
MERUCNTRL(config-essid)# disable
MERUCNTRL(config-essid)# end
MERUCNTRL# sh essid
Note:
The "Service" refers to client connectivity. When the ESSID state is
disabled, the BSSID is removed from the AP and the client will not be
able to view the Disabled SSID on air.
ESS
Profile
Name
Interface
Type
Enable/Disable SSID
Security
Profile
Broadcast Tunnel
meru enable meru default on none
meruwpa enable meruwpa meruwpa on none
meruwpa2ps
k
enable meruwpa2psk meruwpa2psk on none
ESS Profile
Name
Interface
Type
Enable/Disable SSID
Security
Profile
Broadcast
Tunne
l
meru disable meru default on none