Technical data

Adding an ESS with the CLI

Configuring Probe Response Threshold:

ap 7> radio help prt

radio {probe-resp | prt} <radio-name> assigned <snr>|all

<snr>|threshold <snr>|maxresp

set probe response assigned/rssi threshold/max response count.

radio probe-resp <radio-name> assigned <SNR>|all <SNR>|threshold

<SNR>|maxresp <maxcount>

SNR threshold value or Max broadcast probe response count

(0 <= SNR <= 100) 0 disables

(0 <= maxcount <= 128) 0 disables broacast probe response

SNRRange

The GUI must have the SNR value ranging from 0 to 100, zero means probe response

threshold disable.

GUI Page:

Figure 7: Wireless Interface Configuration - Update

Configuring Silent Client Polling with the CLI

Use silent client polling to allow tracking information to be sent between the

controller and the APs and between the AP and a phone that is not in a call or using

powersave. This feature keep the system appraised of a client phone location if the

client moves between APs while the phone is inactive.