User's Manual

4 of 24 Special Release Software for Meru Controllers
© 2007 Meru Networks, Inc.
Multiple Antennas Supported for Specific Needs
WLAN Client Support
The following WLAN clients are supported:
z Dual 802.11a and 802.11b/g radios
z Simultaneous support for 802.11a, 802.11b, and 802.11g clients
z Co-channel interference management for reliable WLAN access
z Basic VoWLAN QoS support for small density deployments of voice clients
Special Release Software for Meru Controllers
Target Build Details
The following list describes the size and checksums for the system images, based on
the model of controller in use. Do not load onto your controller an image that is
intended for another controller model, or problems will occur.
z meru-3.4.SR2-10-MC500-rpm.tar Checksum: 3958546189 Size: 43581440
z meru-3.4.SR2-10-MC1000-rpm.tar Checksum:1023491239 Size:43663360
z meru-3.4.SR2-10-MC1100-rpm.tar Checksum:1359995275 Size:43663360
z meru-3.4.SR2-10-MC3000-rpm.tar Checksum:1023491239 Size:43663360
Install the Special Release Image on Your Controller
The installation of the special release image is performed with the normal Meru
upgrade procedure, summarized in the following steps.
1. Obtain the system image.
In this example, the special release image for the MC500, meru-3.4.SR2-10-MC500-
rpm.tar 3958546189 43581440, is retrieved using FTP from the images directory on
the server named myserver using the username user1 and password userpass. Use the
upgrade system command to upgrade the system. To configure the system so that you
do not need to type the FTP username and password when transferring files, use the