User's Manual

86 Meru Radio Switch RS4000 Reference Guide
show system
Displays the stored system settings.
Syntax show system
Usage Use this command to see the stored RS4000 system settings.
Information such as Description, Contact, Name, Location, Host Name, and Syslog Server are
entered with the command set system. Other entries such as Serial Number, and AP Type are
hardware-specific and cannot be changed. The Up Time, Boot Version, and Software Version
are software-specific and cannot be changed.
Examples Use the following command to display the system settings:
#show system
[system]
Description : Access Point
Up Time(hh:mm:ss.ff) : 00:00:10.74
Contact : meru_ap
Name : meru_ap
Location : meru_ap
Serial Number : 00:10:C6:AA:11:13
AP Type : RS4000
Boot Version : 1.0
Software Version : 1.1-131
Host Name : meru_ap
Syslog Server : 0.0.0.0
Related
Commands
set system