User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- About This Guide
- About the Radio Switch RS4000
- Installing the RS4000
- Configuring the Meru RS4000
- Managing and Monitoring the RS4000
- Command Reference
- MIB Definition Reference
- RFC 1212 MIB-System Group
- RFC 1213 MIB-Interface Group
- IEEE 802.11 MIB-Dot11 Counter Table (Statistics)
- Meru Enterprise MIB-AP System Entry
- Meru Enterprise MIB-Network Configuration MIB
- Meru Enterprise MIB-Load Balancing MIB
- Meru Enterprise MIB-Global Radius Profile Configuration MIB
- Meru Enterprise MIB-Meru Interface Table
- Meru Enterprise MIB-Trap Community Interface
- Meru Enterprise MIB-SNMP Community Interface
- Meru Enterprise MIB-SNMP Traps Flag
- Meru Enterprise MIB-Global Entry
- Meru Enterprise MIB-Syslog Table
- Meru Enterprise MIB-File Transfer Table
- Meru Enterprise MIB-Upgrade Flag
- Meru Enterprise MIB-Upgrade Status Flag
- Specifications
- Regulatory Information
- Channels
- Translated Safety Warnings
Command Reference 87
show trapcommunity
Displays the SNMP trap community configuration.
Syntax show trapcommunity
Usage Displays the SNMP trap collection and forwarding information for the radio interface.
Configuring an SNMP trap community string and IP address of the SNMP manager to which
the traps are sent to is performed with the set trapcommunity command.
Enabling or disabling SNMP is performed with the command set configsnmp.
Examples The following command shows the SNMP trap collection information; that is, that test2 is the
string used as the password and the traps are being sent to the manager at 10.0.0.21:
meru_ap# show trapcommunity
[trapcommunity]
Trap Community String : test2
Trap Community Manager IP Address : 10.0.0.21
Related
Commands
set configsnmp
set trapcommunity