User's Manual

Command Reference 89
show wif
Displays wireless radio interface configuration.
Syntax show wif [if] [object]
Usage Displays the current configuration for all wireless interfaces, or with optional arguments,
displays configuration for specified interface, or particular statistic (object) for specified
interface. The setting that are displayed for this command are set with the set wif command.
Examples The following shows the wireless interface configuration for radio1-1:
#show wif radio1-1
[radio1-1]
ESSID : cwon-testap
Operational Mode : 11a
Rate : auto
Channel : 36
Short Preamble : disable
Tx Power : 30
ESS Vlan Tag : 0
DTIM Period : 1
Publish ESSID : disable
Beacon Interval : 100
Rekey Period : 300
Re-authentication Period : 3600
Key Length : wep128
Security Mode : WEP
Transmission Key Index : 1
Wep Security Mode : shared
WEP Key1 : **************
WEP Key2 : **************
WEP Key3 : **************
WEP Key4 : **************
To show information for an object, channel, on radio1-1, use the following example
command:
meru_ap# show wif radio1-1 channel
if Optional. Specifies the radio interface to show (radio1-1 |
radio2-1| radio1-2 | radio2-2).
object Optional. Show specific object information (for example,
channel) on the specified interface.