User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- About This Guide
- About the Radio Switch RS4000
- Installing the RS4000
- Configuring the Meru RS4000
- Managing and Monitoring the RS4000
- Command Reference
- MIB Definition Reference
- RFC 1212 MIB-System Group
- RFC 1213 MIB-Interface Group
- IEEE 802.11 MIB-Dot11 Counter Table (Statistics)
- Meru Enterprise MIB-AP System Entry
- Meru Enterprise MIB-Network Configuration MIB
- Meru Enterprise MIB-Load Balancing MIB
- Meru Enterprise MIB-Global Radius Profile Configuration MIB
- Meru Enterprise MIB-Meru Interface Table
- Meru Enterprise MIB-Trap Community Interface
- Meru Enterprise MIB-SNMP Community Interface
- Meru Enterprise MIB-SNMP Traps Flag
- Meru Enterprise MIB-Global Entry
- Meru Enterprise MIB-Syslog Table
- Meru Enterprise MIB-File Transfer Table
- Meru Enterprise MIB-Upgrade Flag
- Meru Enterprise MIB-Upgrade Status Flag
- Specifications
- Regulatory Information
- Channels
- Translated Safety Warnings
22 Meru Radio Switch RS4000 Reference Guide
Configuring of the Radio Switch with the CLI Commands
[radio1-1]
status = up
essid = meru1-1
mode = 11a
channel = 36
rate = auto
tx_power = 30
rts_threshold = 2312
dtim_period = 1
publish_ssid = enable
beacon_interval = 100
vlan_tag = 0
[radio2-1]
status = up
essid = meru2-1
mode = 11g
channel = 1
rate = auto
tx_power = 30
rts_threshold = 2312
short_preamble = enable
dtim_period = 1
publish_ssid = enable
beacon_interval = 100
vlan_tag = 0
[radio1-2]
status = up
essid = meru1-2
mode = 11a
channel = 149
rate = auto
tx_power = 30
rts_threshold = 2312
dtim_period = 1
publish_ssid = enable
beacon_interval = 100
vlan_tag = 0
[radio2-2]
status = up
essid = meru2-2
mode = 11g
channel = 11
rate = auto
tx_power = 30
rts_threshold = 2312
short_preamble = enable
dtim_period = 1
publish_ssid = enable
beacon_interval = 100
vlan_tag = 0
[wifsec_radio1-1]