User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- About This Guide
- About the Radio Switch RS4000
- Installing the RS4000
- Configuring the Meru RS4000
- Managing and Monitoring the RS4000
- Command Reference
- MIB Definition Reference
- RFC 1212 MIB-System Group
- RFC 1213 MIB-Interface Group
- IEEE 802.11 MIB-Dot11 Counter Table (Statistics)
- Meru Enterprise MIB-AP System Entry
- Meru Enterprise MIB-Network Configuration MIB
- Meru Enterprise MIB-Load Balancing MIB
- Meru Enterprise MIB-Global Radius Profile Configuration MIB
- Meru Enterprise MIB-Meru Interface Table
- Meru Enterprise MIB-Trap Community Interface
- Meru Enterprise MIB-SNMP Community Interface
- Meru Enterprise MIB-SNMP Traps Flag
- Meru Enterprise MIB-Global Entry
- Meru Enterprise MIB-Syslog Table
- Meru Enterprise MIB-File Transfer Table
- Meru Enterprise MIB-Upgrade Flag
- Meru Enterprise MIB-Upgrade Status Flag
- Specifications
- Regulatory Information
- Channels
- Translated Safety Warnings
50 Meru Radio Switch RS4000 Reference Guide
Examples To manually set the Radio Switch IP addressing, use the following example commands:
set ip boot_protocol static addr 10.0.1.100 netmask 255.0.0.0
set ip gateway 10.0.0.20
set ip domain merunetworks
set ip dns1 65.182.161.201
set ip dns2 24.221.161.5
Related
Commands
show ip