User's Manual

78 Meru Radio Switch RS4000 Reference Guide
show ip
Displays the current network configuration settings.
Syntax show ip
Usage Use this command to see the stored RS4000 IP settings. The IP settings are set with the
command set ip.
Examples Use the following command to display the network addresses settings:
# show ip
[ip]
Boot Protocol : DHCP
IP Address : 10.0.221.14
Network Mask : 255.0.0.0
Default Gateway : 10.0.0.20
Domain : merunetworks.com
DNS1 : 10.0.0.10
DNS2 : 10.0.0.40
DNS3 : 65.182.161.201
DNS4 : 206.13.28.12
Table 6: Field Descriptions for show ip
Parameter Description
Boot Protocol The boot protocol that determines whether the Radio Switch
boots with a static IP address or one assigned using DHCP.
IP Address The IP address for the RS4000. By default, the IP address is
set to 192.168.1.1.
Network Mask The subnet mask for the RS4000 IP address. By default, the
netmask is set to 255.255.0.0
Default Gateway The gateway IP address that the RS4000 uses.
Domain The domain name of the domain where the Radio Switch
resides.
DNS1-DNS4 The addresses for up to four different DNS IP addresses.