User's Manual

Command Reference 83
show runningconfig
Show configuration of running system.
Syntax show runningconfig
Usage The configuration shown by this command is stored in "running nms.conf" file and NOT the
actual running configuration of each components. For this configuration to take effect, the
user must use the command save-conf.
Examples The following shows an except of the running configuration:
meru_ap# show runningconfig
[system_config]
host_name=meru_ap
syslog_server=
[network_config]
boot_proto = dhcp
[radio1-1]
status = up
essid = cwon-testap
mode = 11a
channel = 36
rate = auto
tx_power = 30
rts_threshold = 2312
dtim_period = 1
publish_ssid = enable
beacon_interval = 100
vlan_tag = 0
[radio2-1]
status = up
essid = cwon-testap2-1
mode = 11b
channel = 3
rate = auto
tx_power = 30
----More----
Related
Commands
save-conf