User's Manual

84 Meru Radio Switch RS4000 Reference Guide
show snmpcommunity
Displays the SNMP community configuration.
Syntax show snmpommunity
Usage Displays the SNMP community information for the radio interface. The display shows the
community string and IP address settings for configured SNMP managers with the ReadOnly
and ReadWrite privilege.
Configuring an SNMP community string and IP address of the SNMP manager is performed
with the set snmpcommunity command.
Enabling or disabling SNMP is performed with the command set configsnmp.
Configuring trap community and IP address of the SNMP manager that the traps are sent to is
performed with the set trapcommunity command.
Examples The following command shows the SNMP trap collection information; that is, that test2 is the
string used as the password and the traps are being sent to the manager at 10.0.0.21:
meru_ap# show snmpcommunity
[snmpcommunity]
Read Privilege : snmpRo(1)
Read Community String : public
Read Manager IP Address : 0.0.0.0
Read Write Privilege : snmpRw(2)
Read Write Community String : test2
Read Write Manager IP Address : 0.0.0.0
Related
Commands
set configsnmp
set snmpcommunity
set trapcommunity