Installation Guide
1. The daily maintenance of computerized steam room should be
cleaned with ordinary detergent and wet cloth with toothpaste.
Please do not use the detergent of disinfection which contains
acetone or formaldehyde when operating disinfection.
2. If there are furring on the surface of bathtub, it can be take away
try to wipe the bathtub with lemon juice or vinegar which be
heated.
3. In order to avoid damaging the surface of products please do
not use hardness and sharpness tool to curve the products.
4. Do not wipe the chrome plated spare parts all the time, and do
not get in touch with chemical detergent etc. Otherwise the
surface of chrome finish will be destroyed. The product should
be clean by soft cloth other than coarse cloth.
5. To check the water pipe regularly in order to avoid troubles
from crack of water pipes or blocked inside .
6. If there are something such as hair stuck inside the jets, then
just to twist out the jets and remove it.
7. Suggest to add the filter of water quality in order to make sure
the normal operate of products if the water quality is worse in
the local area.
8. keep out from combustibles and goods which over 80'C to
avoid fire disaster and damage the product.
9. Please let the professional to operate when the steam generator
needs to be replaced.
10. If the bathtub has not been used for a long time, drain out water
of the bathtub and keep it in a dry and ventilate environment.
Avoid corrosive gas.
No advanced advice will be submit before we change our design and size.
The pictures may be a little different from the real products.
Our company keep the final explanation right.
Your best choice!Your best choice!