Use and Care Manual

Input : Master Code -

;

[[ 0_EXIT ]] will appear on the display

Input : 8;

Several digits will appear on the display

Input:

to scroll from page to page

Each page is one full screen

Example :

- 4560 -

- 8 -

#...

KEY TO IDENTIFYING THE LOG

If number 1-5 appears on the display, the safe was opened successfully

using the User 1 Code [the Master Code], & so forth

If A-E is shown on the display, a User Password was changed [A=Master

Code B=User 2 Code, and so on through the letter E]

If B-E is shown on the display, User 2-5 was deleted

If 0 is shown on the display, the safe was opened with the Factory Code

If X is shown on the display, 3 wrong codes were entered & the safe went

into Lock-Out Mode

DELETING THE LOG

NOTE : You must know the Master Code to delete the Log.

Input:

;

[[ MASTER_PW ]] will appear on the display

Input : Master Code -

;

[[ 0_EXIT ]] will appear on the display

Input : 9;

[[ 1=YES OR 0=NO ]] will appear on the display

Input: 1;

[[ SUCCESS!]] will appear on the display

Example :

- 4560 -

- 9 - 1

If you change your mind & decide not to delete the Log, press 0 instead

MFS-SERIES

ELECTRONIC LOCK INSTRUCTIONS

PG.5