Use and Care Manual

of 1 & the procedure will cancel (as it appears on display: [[ ...0=NO ]])
QUICK-REFERENCE KEY
Adding & Changing Additional User Codes:
*
-
#
- MASTER CODE -
#
- 1
Deleting User Codes:
*
-
#
- MASTER CODE -
#
- 2
Changing the Display Mode:
*
-
#
- MASTER CODE -
#
- 7
Viewing the Log:
*
-
#
- MASTER CODE -
#
- 8
Deleting the Log:
*
-
#
- MASTER CODE -
#
- 9
n
CAUTION FIRE SAFE CONTENT STORAGE
A fire safe contains insulation material, which may cause humidity to be
present when closed extended periods of time. It is recommended that the
safe is opened on a regular basis and iterior allowed to air out. It is also
recommended that safe contents sensitive to moisture be kept in a sealed
container [i.e., zip lock bag, etc.]
u
IMPORTANT INFORMATION ON SAFE USAGE
Hold on to your Proof of Purchase [receipt/invoice].
You will need this to order keys or use the Warranty Service
Do not open your safe if it is lying on its side, back or top.
Only open your safe when it is in the upright position
Do not slam the door. Extreme shock can damage the lock or jam the
bolt work system
Do not shut the door with the locking bolts in the locked position.
This may damage the locking bolts & create problems unlocking &
locking the safe
Do not stack contents of the safe so that the door must be forced shut.
Bolt works may jam as a result
Keep liquids away from the keypad. Liquids can damage the keypad
The safe door is removeable. To remove door, unlock the safe, open the door
& lift the door up. Do not lose the hinge pins - they may slide out of the
hinge when removing the door. If they happen to slide out, you can easily
insert them back into the hinge.
If you experience a difference in the feel of the operation, inconsistency
or difficulty opening or operating the safe, DO NOT LOCK THE SAFE.
PG.6
|
MFS-SERIES ELECTRONIC LOCK INSTRUCTIONS