Instruction Manual

Remote Antenna Kit (NL-RAK)

netLiNKControls.com - 214.net.LiNK - Made in USA

The Remote Antenna Kit consists of the following components:

A - Antenna “L” Bracket (1)

B - 900MHz Antenna (1)

C - 20’ Coax Cable

Insert the threaded end of the coax cable in the hole near



the nut (comes with the cable included). Make sure it’s



         





to the building with the appropriate anchors (Not

supplied).

Now the antenna can be screwed onto the threaded end

          

Once completed, the antenna must be above the roof line



         





of the wall mount node and screw on the coax cable. The

coax cable cannot be cut or shortened. Please coil up the



manner.

Step 1

Step 2

Step 3

Step 4