Instruction Manual

netLiNKControls.com - 214.net.LiNK - Made in USA

NOTE:







Pole Mount Node Instructions





“LINE IN” is BLACK wire and the associated BLACK with a WHITE STRIPE wire

 

“LINE OUT” is RED wire and the associated RED with a WHITE STRIPE

wire

“DIMMING” is VIOLET wire and the associated GREY wire

 

SPECIAL NOTE:





CAUTION:

DO NOT CONNECT/REPAIR ANY SYSTEM COMPONENT WITH ENERGIZED CIRCUITS. THE POLE WILL BE

ENERGIZED EVEN IF THE LIGHTS ARE NOT ON. CIRCUITS IN THE POLE WILL BE ENERGIZED UP TO THE

NODE, AND THE NODE CONTROL SYSTEM TURNS THE FIXTURE ON AND OFF.