User manual

4.3.4 NTP

If you want your camera to synchronize its time clock with a NTP (Network Time Protocol) sever, configure the

NTP server settings here.

 NTP Server: Enter the IP address or domain name of the NTP server you want to use.

 Time Zone: Select a time zone in which the camera is located.

 Automatically Adjust for Daylight Saving Time Changes: Check this check box if you want

the camera to adjust the daylight saving time automatically.

4.3.5 RTSP

RTSP is a standard for connecting a client to establish and control streaming data over the web. If you

want to allow third-party devices or software to access video/audio streams from the IP camera over the

network, you must configure the RTSP ports. You can provide five streams according to the specific

codec mode with different RTSP port.