Safety Instructions

Remove & Close The Lens Cover

Placing of Your Projector

To Reduce Image Distoron

Your projector can be installed in four different configurations (see picture below):

Remove the lens cover before using Close the lens cover when unit not using

Front Table

Rear Table

Front Table:

Select this location with the projector placed near the floor

in front of the screen. This is the most common way to

position the projector for quick setup and portability.

Rear Table:

Select this location with the projector placed near the floor

behind the screen.

NOTE: That a special rear projection screen is required.

• Move the projector as close to the center

of the screen as possible.

• The light beam from the projector should

be perpendicular to the screen for a

rectangular or square image.

LENS COVER

REMOVE

LENS COVER

PAIR

POWER

VOL

PAIR

POWER

VOL