Instruction Manual

19 | P a g e
3. Set the Function Switch to the CD position and
press CD PLAY/PAUSE button to pause the
playback.
4. Press the Cassette Pause button for the cassette.
5. Press the Cassette Record and Play buttons for
record stand-by.
6. Start the CD playing by pressing the CD
Play/Pause button.
7. Press the Cassette Pause button when you wish
to start recording.
8. Press the Cassette Stop/Eject button to stop the
recording.
9. The recording will stop when the tape has
reached the end and the Record and Play buttons
will pop up.
10. To hear what you recorded, slide the Function
Switch to TAPE position, then press Rewind and
Play buttons.
CLEANING THE TAPE HEADS
When the heads, capstan and pinch roller become
dirty, this may result in muffled, distorted or
reduced sound during play back and may even
result in tape jams. Remove the cassette tape and
clean with a cotton swab moistened with
commercially sold head/pinch roller cleaner or
alcohol. Wait approximately 10 seconds for the
alcohol or cleaning fluid to dry before using.
Bluetooth Operation
Slide the FUNCTION switch to the CD position and
long press STOP/USB/BT button or long press
CD/USB/BT button on the remote to switch to
Bluetooth mode. Turn on the Bluetooth function of
your device and enable to the search or scan
function to find "SC-2121BT" for pairing. After
pairing your Bluetooth device successfully, the
music from your device will be streaming to play
automatically.