Operating Guide

English

NOTE

●

THIS is a SEQUENTIAL TRIP MECHANISM, and

should be used in accordance with all warnings and

instructions.

●

Always handle nails and package carefully. If nails

are dropped, collating paper may be broken.

●

After nailing:

1) disconnect air hose from the Nailer;

2) remove all nails from the Nailer;

3) supply 5 – 10 drops of Hitachi pneumatic tool

lubricant into the air plug on the Nailer; and

4) open the petcock on the air compressor tank to

drain any moisture.

CHANGING THE EXHAUST DIRECTION

WARNING

●

When changing the exhaust direction, be

sure to remove your ﬁ nger from the trigger

and disconnect the air hose from the nailer.

The direction of the exhaust vent can be changed by

turning the top cover.

Top Cover

Exhaust

Vent

000Book_NR38AK_US.indb 16000Book_NR38AK_US.indb 16 2014/12/03 15:12:422014/12/03 15:12:42