Manual
en
Danger!
(14)
Danger of crushing!
9.1 Straight cuts
Starting position:
(24)
(49)
° (10)
° (22)
(12)
(25)
(34)
(33)
(34)
Cutting the workpiece:
(14)
(26)
(27)
(27)
9.2 Mitre cuts
Starting position:
(24)
(49)
(22)
(12)
(25)
(34)
(33)
(34)
Cutting the workpiece:
(10)
(11)
(10)
9.3 Inclined cuts
Starting position:
(24)
(49)
° (10)
(12)
(25)
(34)
(33)
(34)
(33)
(33)
(33)
Cutting the workpiece:
(22)
(22)
9.4 Double mitre cuts
Note:
The double mitre cut is a combination of mitre cut
and inclined cut. This means, the workpiece is cut
at an angle to the rear contact edge and at an
angle to the top.
Danger!
Starting position:
(24)
(49)
(12)
(25)
(34)
(33)
(34)
(33)
(33)
(33)
Cutting the workpiece:
9.5 Only for KGS...: Sawing grooves
Note:
The cutting depth limitation together with the
pulling device permits the cutting of grooves. This
does not result in a separating cut, but only a cut
of a certain depth is effected in the workpiece.
Risk of kickback!
Starting position:
(24)
(12)
Cutting the workpiece:
(48)
(49)
(26)
Danger!
(32)
10.1 Saw blade change
Risk of burning!
Risk of injury, even with the blade at
standstill!
(40) (5)
(32)
10. Care And Maintenance