Operation Manual

ENGLISHen
14
during the work breaks (press down three times)
while keeping the suction opening shut (on the
suction hose or on the container).
7.3 Integrated blower function
For air-cleaning, drying purposes and diverting
extracted air. For this purpose, insert a suitable
hose (scope of delivery) in the exhaust port (5).
Do not allow the emitted blower air to enter
confined spaces uncontrollably. Ensure the
hose used is clean. Dust can be hazardous to
health.
7.4 Power socket (2)
The power socket (2) is designed for connec-
tion to a power tool only.
The total maximum permissible current
consumption (of vacuum cleaner and
connected unit) must not exceed the value I
max
(see
table, page 3).
If the switch (1) is in the ' ' position, the vacuum
cleaner is switched on or off by means of a power
tool connected to the mains socket (2).
8.1 Dry Vacuuming
Vacuum using a dry filter, dry appliance and dry
accessories only. If the cartridge is damp, dust may
stick and form a crust.
Always use fleece filter bag (9) or PE filter bag (10)
together with pleated filter (11).
8.2 Wet Vacuuming
Never operate the appliance without inserting
a pleated filter (11). Otherwise, the appliance
may be destroyed and water may also escape.
You can use either fleece filter bags (9) or PE filter
bags (10). The pleated filter (11) is suitable for wet
vacuuming.
Before carrying out any wet vacuuming, remove the
dry vacuumed material. This process will prevent
severe soiling and encrustation.
The appliance has a float system that enables it to
switch off the air flow when the maximum liquid level
is reached. When this happens, you will hear a
distinct change in the sound of the motor. Then
switch off the appliance and pull the plug from the
socket. Only vacuum liquids when the float is
working properly (see section 10. Maintenance).
After the appliance is switched off, some water may
run back out of the hose.
Before emptying, first take the suction hose out of
the liquid.
If you are then going to dry vacuum, insert a dry
filter. If there is frequent switching between dry and
wet vacuuming, we recommend the use of a second
(replacement) filter. Allow the filter, container and
accessories to dry: otherwise dust may adhere to
damp components.
8.3 Transport
Leave the hose on the appliance to prevent dust
from accidentally being released.
Secure the suction hose or mains connection lead
to the appliance using the transport bracket.
The upper part (3) must be securely sealed to the
container (8) - check that the snap locks (6) are
closed.
9.1 General Cleaning Instructions
Clean the container and accessories with water.
Wipe the upper part (3) with a damp cloth.
Caution! This appliance contains dust that is
harmful to health. Discharge and maintenance
operations (including disposal of the dust collection
containers) must only be carried out by qualified
specialists wearing appropriate protective clothing
and equipment.
Emptying the Container
Only permitted for dusts with
occupational exposure limits > 1 mg/m
3
.
- Unplug mains cable. Ensure the plug cannot be
reconnected accidentally.
- Open the snap locks (6). Remove the upper part
(3) from the container (8).
- Tip out the container.
Disposing of the Fleece Filter Bag
- Pull the mains plug. Ensure the plug cannot be
reconnected accidentally.
- Put on a dust mask.
- Open the snap locks (6). Remove the upper part
(3) from the container (8).
- Carefully pull back the fleece filter bag (9) from the
suction opening (7).
- Dispose of the vacuumed material in accordance
with legal regulations.
Disposing of the PE Filter Bag
-Insert mains plug.
- Switch on the vacuum cleaner and clean the filter:
Press the button (4) ('PressClean' see
section7.2).
- Switch off the vacuum cleaner: turn the switch (1)
to the "0" position.
- Put on a dust mask.
- Open the snap locks (6). Remove the upper part
(3) from the container (8). Before setting down the
upper part, turn switch (1) to the "I" position so
that any falling dust is vacuumed.
- Carefully pull back the PE filter bag (10) from the
suction opening (7).
- Dispose of the vacuumed material in accordance
with legal regulations.
10.1 General Instructions
Before performing any maintenance, always
switch off the appliance and remove the mains
plug. Ensure the plug cannot be reconnected acci-
dentally.
8. Use
9. Cleaning
10. Maintenance