Operation Manual

Set Socket Chucks No. 1, comprising socket chuck Ø 40 mm, socket chuck Ø 80 mm and screw chuck Ø 64 mm

Stock-no. 091 200 3728

Set Socket Chucks No. 2, comprising 1 each socket chuck Ø 100mm, Ø 130 mm, Ø 150 mm

Stock-no. 091 200 3736

Steadying Rest

Max. workpiece diameter 125 mm

Min. workpiece diameter 10 mm

Support roller diameter 58 mm

Stock-no. 091 200 5070

9 Turning between Centres

Tap centre dive into the workpiece with a mallet.

Mark the centre on both end of the workpiece and drill

Ø 5 mm locating holes. Workpieces wider than 10 cm

should have their edges chamfered, to give them an

octagonal shape.