Operation Manual

2.9
KS 205
Service plan
Trouble shooting
A
Danger!
Prior to every servicing:
- Switch machine OFF.
- Unplug power cable.
- Wait for saw blade to come to standstill.
Check that all safety devices are operational again
after each servicing.
Before switching on
Dust spout (when
working without dust
collection)
Visual check if unob-
structed by chips.
Monthly (if used daily)
Guide elements for
saw setting
- Remove saw dust
with vacuum
cleaner or small
brush;
- Apply light coat of
oil to guide ele-
ments.
Safety devices:
- Retractable blade
guard
- Sawhead lock
Check function.
Power supply cable Check for damage, if
necessary have
replaced by a qualified
electrician.
Every 50 operating hours
Carbon brushes of
motor
Have replaced by a
qualified electrician.
Motor does not run
No supply voltage Check cables, plug,
outlet and mains fuse.
Carbon brushes worn Have replaced by a
qualified electrician.
Loss of cutting performance
Saw blade dull (possi-
bly tempering marks
on blade body)
Replace saw blade
(see section „mainte-
nance“).
Unsuitable saw blade
Saw blade warped
Saw blades makes contact with saw table
Depth stop of saw
damaged
Have repaired by
authorized service
centre.
Saw vibrates heavily
Saw blade warped Replace saw blade
(see section „mainte-
nance“).
Saw blade not properly
installed
Install saw blade prop-
erly
(see section „mainte-
nance“).
Saw rocks
Fastening screws
loose
Retighten fastening
screw.
Turntable does not turn smoothly
Chips under turntable Vacuum.
Fence bent Install a straight fence.