Operation Manual

2.13
KS 304
A
Danger!
Prior to any servicing:
- Switch machine OFF.
- Unplug power cable.
- Wait for saw blade to come to standstill.
Check to see that all safety devices are operational
after any servicing.
Trouble shooting
Motor does not run
No supply voltage Check cables, plug,
outlet and mains fuse.
Carbon brushes worn Replaces carbon
brushes.
Loss of cutting performance
Saw blade dull (possi-
bly tempering marks
on blade body)
Replace saw blade
(see „Saw blade
change“).
Unsuitable saw blade
Saw blade warped
Saw vibrates heavily
Saw blade warped Replace saw blade
(see „Saw blade
change“).
Saw blade not prop-
erly installed
Mount saw blade prop-
erly
(see „Saw blade
change“).
Saw rocks
Fastening screws
loose
Retighten fastening
screws.
Turntable does not turn smoothly
Chips under turntable Vacuum.
Fence bend Install a straight fence.