Operation Manual

31
ENGLISH
spindle moulder
No-load speed n
0
Cutter spindle diameter
Max. cutter diameter in table
Max. cutter diameter in cutter fence
Cutter spindle vertical setting range
Cutter spindle capacity under nut
Cutter spindle direction of rotation (viewed from top)
Sliding carriage - width
Sliding carriage - length
Sliding carriage - setting range
Sound power level - idle running*
Sound power level - working*
Sound pressure level at workplace - idle running*
Sound pressure level at workplace - working*
min
-1
mm
mm
mm
mm
mm
–
mm
mm
mm
dB (A)
dB (A)
dB (A)
dB (A)
4300/6750/8500
30
155
180
130
90
left
140
1080
1320
–
92.5
87.0
82.0
4300/6750/8500
30
155
180
130
90
left
140
1080
1320
–
92.5
87.0
82.0
* The noise emission was esablished according to EN 861, based on operating conditions as defined in ISO7960:1995, Appendixes
B and C.
The values shown are emission levels and are not necessarily safe working levels. Although there is a connection between emis-
sion and immission levels, it can not be reliably concluded whether additional measures are required. The factors, influencing the
actual immission level present at the workplace, include duration of exposure, room characteristics, other sources of noise, etc.,
such as the number of machines and other adjacent processing operations. In addition, the permissible immission level may vary
from country to country.
This information is nevertheless suitable to assist the user of the machine in his assessment of the exposure and risk.
Multi 310 G
1 ~ 230V
Multi 310 G
3 ~ 400V