Operation Manual

12
Read the actually required connection cables/current
in the operating instructions of your device.
In order to avoid electro-magnetic interferences, use
only USB cables not exceeding 1.0 m in length, and
which have a magnetic interference filter.
Remove the battery pack from the device before
carrying out cleaning.
Do not clean with aggressive cleaning agents.
Ensure that the device and the battery contacts are
dry before inserting the battery pack.
Repairs to the device must only be carried out by
qualified electricians.
If you have Metabo devices that require repairs,
please contact your Metabo service centre. See
www.metabo.com for addresses.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: never dispose of power
tools in your household waste! Used power
tools must be collected separately and handed
in for environmentally compatible recycling in accord-
ance with European Directive 2002/96/EC on waste
electrical and electronic equipment and its implemen-
tation in national legal systems.
Only to be used with original Metabo battery packs:
14,4 V: 6.25467, 6.25456, 6.25458, 6.25454,
6.25498, 6.25526, 6.25588, 6.25590, 6.25595 etc.
18 V:
6.25455, 6.25457, 6.25459, 6.25468, 6.25469,
6.25499, 6.25527, 6.25584, 6.25587, 6.25589,
6.25591, 6.25592, 6.25594, 6.25596 etc.
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U = Voltage of battery pack
P=Power input
Phi = Luminous flux
CRI = Colour rendering index
CCT = Correlated colour temperature
m = Weight (without battery pack)
D = Collar diameter
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Tablet Computer 7.5 - 10W (5V DC: 1.5 - 2.0 A)
Internal LED 1.5 - 2W
8. Cleaning
9. Repairs
10. Environmental Protection
11. Technical Specifications