Instructions

ENGLISH en
11
P
2
=Power output
s
0
=Oscillating frequency at idle speed
s
1
=Oscillating frequency at rated load
S =Oscillating circuit diameter
A=Sanding plate
C=Dust bag
m =Weight without mains cable
Measured values determined in conformity with
EN 62841.
Machine in protection class II
~ AC Power
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user e.g. organisational
measures based on the adjusted estimates.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 62841:
a
h
=Vibration emission value (surface
grinding)
K
h
=Uncertainty (vibration)
Typical A-effective perceived sound levels
:
L
pA
= Sound-pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
= Uncertainty
The noise level can exceed 80 dB(A) during
operation.
Wear ear protectors!